Fit your ZENNIUM electrochemical workstation to your application. Control external potentiostats, capture additional physical properties or enhance your system to a true parallel impedance analyzer by the help of suitable ZAHNER Add-On Cards.
The ZENNIUM X, IM6, ZENNIUM pro and ZENNIUM electrochemical workstations are based on a modular concept which allows a quick and easy expansion with additional hardware and software. Simply plug in an add-on card into an empty expansion slot of the ZENNIUM workstaton. The Thales software will automatically detect the card and enable corresponding functions.
The EPC42 is a controller module for external potentiostats. Each EPC42 is able to address up to 4 PP/EL/XPot devices. Up to four EPC42 cards can be installed in a ZENNIUM/ZENNIUM X/ZENNIUM pro system. In total, an advanced ZENNIUM electrochemical workstation has the ability to control up to 16 external PPs/XPots.
The ZAHNER PAD4 is a 4-channel add-on card for ZENNIUM Electrochemical Workstations. It introduces four additional parallel sampled signal inputs for cell voltage and impedance in fuel cell stacks and battery packs, with a common current.
ZAHNER TEMP/U enables the measurement of temperature by direct connection of two different thermocouples. Two additional electrochemical potential measurements can be done by connecting auxiliary electrodes to the medium level inputs.
Transient recorder TR8M with 8 MSample up to 20 MHz. With the TR8M you can record fast pulses and transients. Together with the Pluse Probe and an external potentiostat or electronic load you can perform high current interrupt (HCI) measurements.
The RMux add-on card allows to connect up to 16 electrochemical cells to your electrochemical workstation simultaneously.
The RMux4 addon card allows to connect up to 4 different electrochemical cells to your ZENNIUM X, ZENNIUM pro and ZENNIUM potentiostat, simultaneously.
The MIO addon card provides 4 analog outputs with an voltage range of ±10 V, 4 digital inputs and 4 isolated digital outputs.
The power cell multiplexer PMux can be used with ZENNIUM electrochemical workstations as well as with an external potentiostat from the EL-Series, PP-Series and XPot. It can manage a cell current up to ±5 A.