The power cell multiplexer PMux can be used with ZENNIUM electrochemical workstations as well as with an external potentiostat from the EL-Series, PP-Series and XPot. It can manage a cell current up to ±5 A.
There are two configurations of the PMux. The PMux-S can measure 16 individual cells compared with the PMux-P which is configured to measure 16 segmented cells for example of a fuel cell.
The PMux-S is configured for sequentially measuring through up to 16 individual cells using either the internal potentiostat of the IM6/Zennium or an external potentiostat of the PP-series or an electronic load of the EL-series.
The PMux-P is configured for sequentially measuring through up to 16 segments of a segmented fuel cell. For that application a PP-series potentiostat or an EL-series electronic load is used for loading all segments except the one which is measured. The measurement is done by the internal IM6/Zennium potentiostat. The software carries out sequential measurements through all segments of the fuel cell. With one PMux-P these are up to 16 segments. Up to 3 PMux-P modules can be stacked for a total of up to 48 segments. Both, the PP and the IM potentiostat have to be connected to the PMux-P.
Each PMux device includes a RMux addon card for controlling the cell multiplexer. This means that every PMux needs an extension slot of the IM6/Zennium.
|Max. current||±5 A||±5 A||±5 A|