High-End Meets Compact

ZENNIUM XC

The ZENNIUM XC has been discontinued and has been replaced by IM7c.

The ZENNIUM XC is a compact potentiostat / galvanostat including a frequency response analyser. It offers 32 bit DC resolution and 24 bit AC resolution across 12 different current ranges, which ensure exceptionally accurate and precise measurements. The ZENNIUM XC combines compact design with the high-end measurement hardware.

A list of main electrochemical measurements possible with the ZENNIUM XC potentiostat is provided here.

  • DC voltage ranges: ±5 V and ±14 V
  • Current up to ±2 A over 12 current ranges
  • EIS frequency range from 10 µHz to 5 MHz
  • AC amplitude of 0 - 6 V or 0 - 2 A for EIS
  • Switchable floating / grounded mode

General

General
ParameterValue
Overall bandwidthDC - 6 MHz
ADC resolution32 bit
Harmonic reject*> 60 dB @ ½ full scale
Potentiostat modespotentiostatic, galvanostatic, pseudo-galvanostatic, OCP, ZRA, FRA
Cell connection2-, 3-, 4-terminal kelvin
Ground referencegrounded, floating
PC interfaceUSB 2.0
Dimensions (H x W x D)160 x 255 x 385 mm3
Weight8 kg
Accessoriescell cable set, USB cable, power cord, manual, Thales XT software suite, 3 Zahner Analysis licenses
Power supply100/115/230 VAC, 50/60 Hz
Ambient temperature+10 °C to +30 °C
Ambient humidity< 60% without derating
Storage temperature-20 °C to +85 °C

* * Preliminary

Input

Input
ParameterValue
Maximum input voltage±5 V
±14 V
5 V range
14 V range
Voltage resolution±2.5 nV
±7.5 nV
5 V range
14 V range
Voltage accuracy*±100 µV ± 5 ppm of reading
±300 µV ± 10 ppm of reading
5 V range
14 V range
DC current resolution±2 aA (32 Bit)Main / HiZ Probe
DC current accuracy*±0.05% of reading ± 0.04% of FS
±0.5% of reading ± 0.4% of FS
±0.5% of reading ± 0.4% of FS
±0.5% of reading ± 125 fA
1 µA ... 100 mA
100 mA ... 2 A
10 nA ... 1 µA
< |1 nA| (HiZ Probe)
Input impedance*> 10 TΩ || ±5 pF (typical)
> 1000 TΩ || ±1 pF (typical)
Main
HiZ Probe
Input leakage current*< |200 fA| typ.
< 2 - 5 pA
< |10 fA| typ.
Main
HiZ-Probe
Impedance range*1 mΩ to 10 GΩ / 2%
100 mΩ to 10 MΩ / 0.2%
100 mΩ to 100 GΩ / 2%
10 µΩ to 1 GΩ / 2%
1 mΩ to 10 MΩ / 0.2%
Main
HiZ
Gal
Common mode rejection*> 86 dB @ 10 µHz to 100 kHz
> 66 dB @ 100 kHz to 5 MHz
Input channel phase-tracking accuracy±0.05 ° @ 10 µHz to 100 kHz
±0.125 ° @ 100 kHz to 5 MHz
Equivalent effective input noise*1 µV rms / 100 fA rms @ 1 mHz to 10 HzMain

* * Preliminary

Output Potentiostatic

Output Potentiostatic
ParameterValue
Controlled voltage±5 V
±14 V
Resolution2.5 nV
7.5 nV
5 V range
14 V range
Accuracy*±200 µV ± 10 ppm of reading
±600 µV ± 10 ppm of reading
5 V range
14 V range
Integral Nonlinearity*typ. 4 ppm, max. 8 ppm
typ. 12 ppm, max. 24 ppm
5 V range
14 V range
AC amplitude0 to 2 V, 24 bit resolution
0 to 6 V, 24 bit resolution
5 V range
14 V range
Bandwidth6 MHz @ 33 Ω load
IR compensationauto AC impedance technique
range 0 to 10 MΩ
resolution 0.012%
Small signal rise time150 ns to 200 µs in 5 stepsautomatic selection
Slew rate*15 MV/s
Phase shift*10° @ 500 kHz

* * Preliminary

Output Galvanostatic

Output Galvanostatic
ParameterValue
Controlled current±2 A
Current range±1.9 nA to ±2 A in 12 stepsMain
Resolution32 bit, ±0.2 ppb of FS (1ppm @ 1 pA)
Accuracy*±0.1% of reading ± 0.04 % of FS
±0.4% of reading ± 0.2% of FS
≥ 1 µA to 100 mA
< 1 µA or > 100 mA

* * Preliminary

Frequency Generator & Analyzer

Frequency Generator & Analyzer
ParameterValue
Frequency range10 µHz to 5 MHz
Accuracy*< 0.0025%
Resolution0.0025%,
10000 steps/decade

* * Preliminary

Compact system

Extensions

Probes

Equip your ZENNIUM XC potentiostat with dedicated accessories for your required experiments like high impedance measurements (up to GΩ), low impedance measurements (down to µΩ) or high voltage measurements (up to 100 V) etc.

Downloads

Request a Quote

Is this the right product for you? Contact our sales team to get further information about our products and their suitability to your individual applications.

Contact sales